Malvern Heavy Duty Apex

Roof upgrade options are available on the following Malvern Heavy Duty Sheds:

Malvern Heavy Duty Apex, Reverse Apex and Combination:
– Upgrade to bitumen mineral felt tiles, onduline roof, pressure treated slatted roof, cedar slatted roof, pressure treated cedar shingle roof or slate effect tiles
– Opt for a higher pitched roof to gain extra internal height

Malvern Heavy Duty Pent and Corner:
– Upgrade to an EPDM rubber roof – a maintenance free, synthetic, one-piece rubber membrane

Add guttering and downpipe to your garden building (dependant on roof finish), available in a choice of three colours.

Upgrade the exterior cladding of your building:

Malvern Heavy Duty range:
– Heavy duty 23mm redwood barnstyle redwood
– Heavy duty 19mm pressure treated redwood tongue & groove
– Heavy duty 23mm pressure treated redwood barnstyle
– 12mm Western Red Cedar tongue & groove

Potting shed:
– Heavy duty 19mm pressure treated redwood tongue & groove
– 12mm Western Red Cedar tongue & groove

Stable door
– Upgrade to a stable door, where the top and bottom of the door operate independently

Security pack
– Add a security pack including a 6 pin lock and security screws

Hinges
– Upgrade to heavy duty, robust hook and band hinges

Window upgrade options include:
– Georgian-style windows
– Double glazing (excluding Georgian-style windows)
– High level security fixed windows in lieu of opening, at no additional cost

Coloured painted finish
A comprehensive paint system is applied prior to your building leaving the factory. The paint system comprises of an initial undercoat and a further top coat of your chosen colour.

Your building can be internally lined with foil back bubble insulation to the walls and ceiling, covered with 12mm redwood tongue and groove matchboard.

Add a set of pressure treated floor bearers
Floor bearers are 45x45mm pressure treated lengths of timber which run in an opposite direction to the floor joists, making a crisscross formation. By taking away direct contact from the base, they allow air circulation and ventilation.

The following upgrade options are available on your Malvern Heavy Duty Shed:

– Internal partitions and walls can be added to your garden building to create additional rooms or storage sheds
– A covered, open sided decked area can be added to your building. Timber decking is used for this open area, with the option to upgrade to composite decking – a high density, heavy duty and weather resistant wood composite
– A 0.91m wide integral tidystore (Reverse Apex and Pent) or 0.91m logstore (Apex) can be added

Upgrade your building with the addition of heavy duty workbenches and shelves.

Heavy duty staging and high level shelving is also available in the Malvern Heavy Duty Combination model.

Utilise our fully managed planning application service to take the stress out of securing planning permission for your garden building.

Black highlights – Window frames and fascias can be painted black.